1.) Mud tubes. Subterranean termites will often make their nest in the soil (moisture source) and then build highways called "mud tubes" that run vertically or otherwise to connect the nest to a wooden food source. Mud tubes are a definite manifestetation of active termite infestation, but the absence of mud tubes does not mean that no infestations exist, since there are other ways that termites reach food sources.
If you tap the damaged wood with the end of the screwdriver, you will hear a dull thud. Wood suspected of termite damage can be further inspected by probing the surface with the screwdriver or pocket knife to expose tunnels.
USING BORESCOPES OR INSPECTION CAMERA
Using a borescope is less destructive than removing wall sheets but these inspections have their limitations. Borescopes will show termite activity and damage.
Pests, especially the termites are hard to detect until they cause a visible damage to your property and in most of the cases, the homeowners get too late to get it repaired. So, in order to ensure that your property is safe and secure from the pests, you can go for the borescope inspection. It will let you detect the termite activity at its early stage and thus, you can go for the timely solutions to prevent the further damage.
If you are still thinking that why you should go for borescope inspection, let’s remind you that it will eliminate the need of demounting the walls for detecting pests and will also save much of your time. Also, when it comes to the inspection using a borescope, you should always rely on the professional experts for the proper inspection. As you may not be experienced with its working and right way of use, you would not be able to do the inspection yourself. As borescopes detect only the particular area, the professionals effectively know where they should make the hole and insert the borescope for accurate inspection.
INJECTING THE TERMITICIDE SOLUTION INTO THE DRILLED HOLES
You can visit our website http://tekpest.com